Ceiling Fan Size Calculator (Room ft² → Blade Span)

Hong Kong service charge, extra tipping and bill-splitting in one tool.

Estimate monthly bill using the latest CLP / HKE tariff.

Estimate the fuel cost of a trip from distance, vehicle consumption and fuel price (one-way or round-trip).

Enter the bill, service charge, tip and party size to get each person’s share — then round each share up to the nearest $1 / $5 / $10 / $20 / $50 to make cash collection painless.

Enter the original price and a percent off (or fixed amount off) to see the final price, money saved and effective discount.

Convert between cups, tablespoons, teaspoons, millilitres, ounces and grams — for following overseas recipes or halving / doubling portions.

Compare two products by price-per-unit (per g, kg, ml, L or each). Enter price + amount + unit for each — see which is cheaper and by how much.

Convert hourly wage to monthly / annual salary or back — with customisable hours per week and weeks worked per year. Works for part-time, freelance and salaried jobs.

Estimate a dog's human-equivalent age from its actual age and size (small / medium / large / giant), with both the classic "×7" rule and modern research curves side by side.

How many people, how hungry, and how many slices per pizza? Get the exact number of pizzas to order — no leftovers, no shortages.

Enter room dimensions and tile size to estimate the number of tiles needed (including a configurable waste allowance) — for floor or wall jobs.

From room length, width and height, door and window area, paint coverage per litre and the number of coats, estimate how many litres of paint you need.

Pick a brew method (pour-over, French press, cold brew or espresso) and a desired output, and get the exact coffee dose and water weight to match the recommended ratio.

Enter the room size, roll dimensions and pattern repeat to get the number of wallpaper rolls to order (with pattern-match waste included).

Enter cigarettes per day, price per pack and years smoked — see your total spend and how much you could save by quitting.

Convert any roof rise / run into the X-in-12 pitch notation used by builders, plus the slope angle in degrees, slope percentage and the rafter-length multiplier.

Enter slab length, width and thickness with a waste factor and get the concrete volume (m³, yd³, ft³) plus the approximate number of 25 kg, 40 kg or 80 lb pre-mix bags required.

Enter total rise and a target riser height to get the number of risers, actual riser height, tread depth, stringer length, pitch and a side-by-side compliance check against the IRC, IBC and UK Approved Document K.

Enter room area, ceiling height, sun exposure, occupants and climate to find the recommended air-conditioner BTU rating / horsepower.

Enter your wedding date to see the anniversary number, days until the next one, and the traditional / modern gift theme (paper, silver, gold…).

Convert oven temperatures between Celsius, Fahrenheit and British gas marks, with descriptive labels (slow / moderate / hot / very hot).

Enter original servings and desired servings to scale every ingredient proportionally, with friendly rounding to common cookware-sized amounts.

Enter your cat's real age to estimate the human-equivalent age using the standard veterinary formula and see the matching life stage (kitten, adult, senior, geriatric).

Enter price, expected number of uses and upkeep cost to compute true cost per use — see whether that item is really worth it.

Estimate hiking time with the classic Naismith's Rule (1 h per 5 km plus 1 h per 600 m of ascent), with optional descent and rest-time corrections.

Enter power (W / kW / hp) and weight (kg / lb) to instantly compute W/kg, hp/kg and hp/lb ratios with cyclist and car performance bands.

Enter battery capacity (kWh), charger power (kW) and the start / target state of charge to estimate how long an EV charging session takes, with adjustments for charging efficiency and the constant-current → constant-voltage taper above 80 %.

Enter the original gravity (OG) and final gravity (FG) of a beer or wine ferment and the calculator returns the standard homebrewing ABV estimate ABV ≈ (OG − FG) × 131.25, plus apparent attenuation and a calorie estimate.

Enter the area and target depth to compute the volume of mulch, soil or gravel needed (in litres, m³ and cubic yards), and estimate bag count and total cost.

Enter the dimensions of your tank — rectangular, cylindrical or bow-front — to get the water volume in litres, US gallons, UK gallons and water weight, with a fill-percentage adjustment for substrate and décor.

Enter flour weight and target hydration to get water, salt and yeast quantities via baker's percentage — with Neapolitan, NY and Sicilian style presets.

Enter an original price and two discounts applied in sequence (e.g. "30% off then an extra 10%") — the tool returns the final price, the equivalent single discount and the savings, sidestepping the common mistake of simply adding the percentages.

Enter a TV or monitor diagonal and an aspect ratio (e.g. 16:9, 21:9) and the tool returns the actual width, height and area in both inches and centimetres — handy for furniture planning, wall-mount fit and seeing why a "55-inch" is so much bigger than a "50-inch" in area.

Enter great-circle distance (km / mi / nm), cabin class and segment type (domestic / short / long-haul); the tool applies DEFRA 2024 emission factors to estimate per-passenger CO₂-equivalent kilograms, total trip emissions and tree-month offsets — the standard checklist for business-travel reporting, personal carbon budgets and offset-purchase decisions.

Enter an amount and a VAT / GST rate; the tool computes both directions — adding tax to a net price, and extracting the tax already embedded in a gross price. Works for any country that uses VAT / GST / IVA / TVA (UK 20%, EU 17–27%, AU & SG GST, India GST, etc.).

Enter daily energy use (kWh), peak sun hours, panel wattage and overall system efficiency; the tool returns the required array size in kW and the number of panels needed — a starter sizing tool for rooftop PV, off-grid cabins and RV / van conversions.

Enter room L × W × H and target air changes per hour; the tool returns the required ventilation airflow in CFM, m³/h and L/s. Built-in ASHRAE 62.1 presets (bedroom, kitchen, conference room, gym, etc.) make it easy to size extract fans, supply diffusers and HEPA purifiers.

Enter chainring teeth, sprocket (cog) teeth and wheel size (700C, 26", 29er, etc.); the tool returns classic gear inches, metres of development and speed for any cadence — cyclists' go-to comparison for climbing-friendly vs. high-speed gear setups.

Enter the hang time of a jump (seconds); the tool applies the free-fall formula h = ⅛ g t² to give the vertical jump height (cm), and also reports the take-off velocity and apex time — used in basketball, volleyball, plyometric training and fitness testing.

Enter the number of teams or players; the tool returns total matches and rounds for single-elimination (N − 1), double-elimination, single round-robin (N·(N−1)/2) and double round-robin formats, plus the number of byes in the knockout bracket — useful for tournament scheduling in sports, board-game leagues and esports.

Enter total swim time and distance (metres or yards); the tool returns pace per 100 m (or 100 yd) and predicts completion time for any target distance — essential for pool training, triathlon and masters racing.

Enter two players' Elo ratings (chess, online games or any Elo-style ladder); the tool uses the FIDE formula E = 1 ⁄ (1 + 10^((Rb − Ra) ⁄ 400)) to return each player's expected score and the rating change after a chosen result and K-factor — used by chess players, esports competitors and Glicko/USCF tournament preparation.

Enter total fence length, spacing between posts and number of gates; the tool returns post count (line + corner + end), rail count and panel sections — the classic "fence-post problem" reduced to one click for homeowners, farms and contractors estimating materials.

Enter room length, width and height, opening (door / window) area, sheet size (4×8, 4×10 or 4×12 ft) and waste factor; the tool returns sheets needed, total square footage and estimated screws, joint tape and joint compound — a quoting tool for DIY remodels and drywall contractors.

Enter the length, width and thickness of a driveway or road; the tool uses the density of hot-mix asphalt (~2.4 t/m³) to return tonnage and converts inch/foot inputs to metric tonnes — a quoting tool for DIY homeowners, HOAs and paving contractors.

Enter pet weight, species (dog or cat), life stage and activity level; the tool uses the NRC Resting / Maintenance Energy Requirement formulas to compute daily calorie needs and the matching dry-food portion (grams/day) — the standard tool for pet owners.

Recipe calls for pan A but you only have pan B? Enter both pans (round / square / rectangular) and the tool returns the ingredient scale factor by volume ratio plus a suggested bake-time adjustment — works across all common pan shapes.

Enter screen diagonal (inches) and resolution (1080p / 4K / 8K); the tool returns optimal and maximum viewing distance based on SMPTE 30°, THX 36° field-of-view recommendations and human visual acuity — the standard tool for sizing a new TV or arranging your couch.

Enter the gasoline volume and the desired ratio (25:1, 32:1, 40:1, 50:1, etc.); the tool returns the exact two-stroke oil quantity in mL and US fl oz — works for chainsaws, weed trimmers, outboard motors, two-stroke motorbikes, leaf blowers and any other two-stroke engine.

Enter a server's total tips for the shift and the percentage tipped out to each support role (bartender, busser, host, kitchen); the tool returns the amount sent to each role and the server's take-home tip. The standard "tip out" workflow used in US, Canadian and Australian restaurants.

Enter the counts of Promoters (9–10), Passives (7–8) and Detractors (0–6); the tool returns NPS = %Promoters − %Detractors on a −100 to +100 scale. The de-facto standard customer-loyalty and product-experience metric for SaaS and retail.

Enter the post engagements (likes + comments + shares) and the denominator (followers, reach or impressions); the tool returns engagement rate by all three bases. Standard benchmark in influencer marketing, brand-KOL evaluation and ad-campaign reporting.

Enter the semitone gap between two notes (or two frequencies directly); the tool returns the frequency ratio via 2^(n⁄12) and the cents gap via 1200·log₂(f₂⁄f₁). The standard tool for music theory, instrument tuning and harmonic analysis.

Enter the horizontal distance covered and the vertical altitude lost; the tool returns the glide ratio (L/D), the glide angle and the equivalent lift-to-drag ratio. The fundamental performance metric for paragliders, sailplanes, unpowered aircraft and skydivers.